Duronic DW5 handleiding
Handleiding
Je bekijkt pagina 9 van 130
9
Installation
How to use the Dishwasher
Inlet Pipe:
1. Connect the inlet pipe to the direct water inlet found at the back of the
dishwasher.
2. This pipe can now be connected to a water valve or tap via an adaptor to
allow the water to be taken in.
Please note: The dishwasher can alternatively be lled with the jug at the manual
water inlet.
Drain Pipe:
1. Connect the drain pipe to the water outlet found at the back of the
dishwasher.
2. The pipe can now be connected to any of the following to drain water:
a. Attached to the sink via the suction pad.
b. Connected to the sink trap.
1. Remove any large food particles from the plates and dishes before loading
into the dishwasher.
2. When loading the dishes, place them tilted or stained side down. Please refer
to the tableware diagram below.
3. Plug the dishwasher in and press the power button to turn on.
4. Use the 1.8L jug to pour water in the mesh opening found at the top of the
dishwasher. Fill until the water can just about be seen. Alternatively, the inlet
pipe can be connected to the tap directly.
Bekijk gratis de handleiding van Duronic DW5, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Duronic |
| Model | DW5 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 9655 MB |