Durkopp Adler D888 handleiding
Handleiding
Je bekijkt pagina 44 van 264
Operation
42 Operating Instructions D888 e-con - 00.0 - 12/2023
4.9 Adjusting the needle thread regulator
The needle thread regulator determines the tension applied to
guide the needle thread around the hook.
Proper setting
The loop of the needle thread slides at low tension over the thickest
point of the hook.
4.9.1 For one-needle machines
Fig. 24: Adjusting the needle thread regulator (one-needle machine)
To adjust the needle thread regulator:
1. Loosen the screw (2).
• To increase the tension: Slide the needle thread
regulator (1) to the right
• To reduce the tension: Slide the needle thread
regulator (1) to the left
2. Tighten the screw (2).
WARNING
Risk of injury from needle tip and moving parts!
Puncture, cutting and crushing possible.
Switch off the machine before adjusting the
needle thread regulator.
(1) - Needle thread regulator (2) - Screw
①
②
Bekijk gratis de handleiding van Durkopp Adler D888, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D888 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 27738 MB |
