Durkopp Adler D888 handleiding
Handleiding
Je bekijkt pagina 31 van 264
Operation
Operating Instructions D888 e-con - 00.0 - 12/2023 29
14. Pull the thread through the needle eye (15) in such a way that
the loose thread end has a length of approx. 4 cm with the
thread lever (9) at the highest position.
Important:
Check the thread length.
If the loose thread end is too long, the thread may be caught by
the hook and cause a disturbance. If the loose thread end is too
short, the machine cannot start sewing.
4.5.2 For two-needle machines
Fig. 11: Threading the needle thread (two-needle machine) (1)
To thread the right and the left needle thread:
1. Fit the thread reels on the reel stands.
The unwinding bracket must stand directly above the thread
reels.
2. Feed the left thread from the rear to the front through the thread
guide (2) on the unwinding bracket.
3. Feed the right thread from the rear to the front through the
thread guide (2) on the unwinding bracket.
(1) - Tube (2) - Thread guide on the unwinding
bracket
②
①
Bekijk gratis de handleiding van Durkopp Adler D888, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D888 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 27738 MB |
