Durkopp Adler D888 handleiding

264 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 234 van 264
Troubleshooting
232 Operating Instructions D888 e-con - 00.0 - 12/2023
9955 Warning Desk positioning Timeout A timeout occurred during positioning.
If the desk is not positioned at its minimum
or maximum height, check if it is blocked
9956 Warning Desk Height Sensor Error The sensor for the desk height measurement
is not responding or transmits a faulty signal.
The height adjustment is not possible.
Check cable connections
Check if the sensor is switched on
The height cannot be adjusted until the
error has been corrected and the
machine has restarted
9957 Warning Height limit control active Height limit control active
9958 Warning A function of the Perfect
Quality Sensor (PQS) is
active
A function of the Perfect Quality Sensor
(PQS) is active. Therefore the lifting
height or the needle position could
change automatically.
9961 Warning Material thickness above
maximum limit
The current material thickness exceeds
the maximum permissible limit.
9962 Warning Material thickness below
minimum limit
The current material thickness falls below
the maximum permissible limit.
9963 Warning Please Wait! Please wait for the ongoing operation to
be finished
9964 Warning Edge Guide in Wrong
Position
Edge Guide must be in the right position
9965 Warning Select target position Select target position
9966 Warning Thread Tension too low
(Warning)
Thread Tension too low (Warning)
9967 Warning Edge Guide in Wrong
Position
Edge Guide must be in the right position
9968 Warning PQS not connected PQS is activated but not connected,
please check the connection to the PCB
or call the DA service
9969 Warning Thread Tension too high
(Warning)
Thread Tension too high (Warning)
Code Type Possible cause Corrective

Bekijk gratis de handleiding van Durkopp Adler D888, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkDurkopp Adler
ModelD888
CategorieNaaimachine
TaalNederlands
Grootte27738 MB