Durkopp Adler D888 handleiding
Handleiding
Je bekijkt pagina 179 van 264
Setup
Operating Instructions D888 e-con - 00.0 - 12/2023 177
To adjust the working height:
1. Loosen the screws (1) on the stand bars.
2. Adjust the tabletop to the desired height.
Important
Pull out or push in the tabletop evenly at both sides to prevent it
from jamming.
3. Tighten the screws (1) on the stand bars.
7.7 Assembling the control
Fig. 91: Assembling the control
To assemble the control:
1. Use three screws to screw the control (2) in place under
the tabletop.
2. Clamp the power cable of the control (2) into the strain relief
mechanism (1).
3. Screw the strain relief mechanism (1) under the tabletop.
(1) - Strain relief mechanism
(2) - Control
(3) - Drill holes for screws
③
②
①
Bekijk gratis de handleiding van Durkopp Adler D888, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D888 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 27738 MB |
