Durkopp Adler D888 handleiding
Handleiding
Je bekijkt pagina 153 van 264
Programming Commander DELTA
Operating Instructions D888 e-con - 00.0 - 12/2023 151
5.9.7.1 Setting the Puller parameters
The puller supports the transport of the sewing material. The feed
of the two rollers is calculated automatically based on the stitch
length of the machine. An adjustment may be necessary depend-
ing on the application.
The rollers of the puller can be adjusted separately. The input is
in percent: a positive value increases the roller feed while a
negative value reduces the feed.
Icon Menu item Setting
Puller correction synchronization (Top/Bot-
tom)
This function is used to synchronize the
correction values for the top and the
bottom roller.
Value range
On/Off
Correction top roller
The feed of the top roller is calculated
automatically based on the stitch
length. An adjustment may be neces-
sary depending on the application.
The rollers can be adjusted separately.
The input is in percent and will either
increase or reduce the feed.
Value range
-10–10 [%]
Correction bottom roller
The feed of the bottom roller is calcu-
lated automatically based on the stitch
length. An adjustment may be neces-
sary depending on the application.
The rollers can be adjusted separately.
The input is in percent and will either
increase or reduce the feed.
Value range
-10–10 [%]
Bekijk gratis de handleiding van Durkopp Adler D888, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D888 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 27738 MB |
