Durkopp Adler D888 handleiding
Handleiding
Je bekijkt pagina 105 van 264
Programming Commander DELTA
Operating Instructions D888 e-con - 00.0 - 12/2023 103
Options for setting the
Needle thread tension
parameter
Menu item Setting 1 Setting 2
Linear
absolute
Needle thread tension
Value range
00 – 99 [%]
Maximum needle thread
tension reached at the upper
material thickness limit.
Min. Material thickness
Value range
00.0 – 10.0 [mm]
Material thickness at which
the increase in needle
thread tension should start.
Max. Material thickness
Value range
00.0 – 10.0 [mm]
Material thickness up to
which the increase in needle
thread tension should occur.
Linear
with
offset
Offset
Value range
-99–99
Difference up to maximum
needle thread tension
reached at the upper
material thickness limit.
Min. material thickness
Value range
00.0 – 10.0 [mm]
Material thickness at which
the increase in needle
thread tension should start.
Max. material thickness
Value range
00.0 – 10.0 [mm]
Material thickness up to
which the increase in needle
thread tension should occur.
2. Value
On/Off
Min. Material thickness
Value range
00.0 – 10.0 [mm]
Material thickness from
which the second needle
thread tension should be
used.
2. Value On Min. Material thickness
Value range
00.0 – 10.0 [mm]
Material thickness from
which the second needle
thread tension should be
used.
Bekijk gratis de handleiding van Durkopp Adler D888, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D888 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 27738 MB |
