Durkopp Adler D867 e-con handleiding
Handleiding
Je bekijkt pagina 74 van 286
Programming Commander DELTA
72 Operating Instructions D867 e-con - 00.0 - 06/2023
4. Press to select the option Not stored or Stored.
5. Press outside the selection to exit the selection.
The adjusted settings are stored.
5.4.8 Desk height adjustment
To allow the Default User to access the display Desk height
adjustment, the setting must be activated in the machine
configuration.
To activate the desk height adjustment:
1. Log in by entering technician and 25483 for username
and password.
2. Open the burger menu and go to Settings - Machine
configuration to select the button Desk height
adjustment.
3. Activate the slider control:
Desk height adjustment enable
The desk height adjustment is active.
4. Define the desired settings:
5. Open the burger menu and click on the Logout button to log
out of the Default Technician.
Icon Parameter Setting
Desk height adjust-
ment enable
Value range On/Off
Desk height offset
If there is an obstacle
below the sensor, the dis-
tance between the obsta-
cle and the floor must be
specified.
Value range
-60.0 - 80.0 [cm]
Table height Value range
0.0 - 140.0
Bekijk gratis de handleiding van Durkopp Adler D867 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D867 e-con |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 32197 MB |
