Durkopp Adler D867 e-con handleiding
Handleiding
Je bekijkt pagina 64 van 286
Programming Commander DELTA
62 Operating Instructions D867 e-con - 00.0 - 06/2023
2. Hold the assigned NFC chip (1) up to the arm cover on
the right-hand side (2).
If the NFC tag has been assigned correctly, the user will be
logged in.
Information
To log out, you can hold up the NFC tag again or log our manually
on the control panel.
5.3.3 Login with USB key
Assigning a USB key to a user
To assign a USB key to a user:
1. Select a user in User Management or create a new user
( p. 83).
2. Press the item Login with USB key.
A new window opens.
3. Plug the USB key into one of the ports on the control panel.
4. Select the USB key you wish to assign to the user for login
purposes.
5. To assign the USB key, press Pair.
The window disappears, and the function Login with
USB key is active.
Login with USB key
To log in with a USB key:
1. Plug the assigned USB key into the control panel.
If the USB key has been assigned correctly, the user will be
logged in.
Bekijk gratis de handleiding van Durkopp Adler D867 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D867 e-con |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 32197 MB |
