Durkopp Adler D867 e-con handleiding
Handleiding
Je bekijkt pagina 54 van 286
Operation
52 Operating Instructions D867 e-con - 00.0 - 06/2023
At seam beginning
Start bartack
and sew
• Press the pedal forwards (position +1) and keep it
there.
Machine sews a start bartack (if specified).
Afterwards, the machine continues to sew - with
increasing speed the further forward the pedal is
pressed.
In the middle of the seam
Stop sewing • Release the pedal (position 0).
Machine stops. Depending on the setting, sewing
feet and needle are up / down.
Continue the
sewing process
(after releasing
the pedal)
• Press the pedal forwards (position +1)
Machine continues to sew - with increasing speed
the further forward the pedal is pressed.
Sew over
thicker parts of
the material
• Switch on the elevated sewing foot stroke with the
knee button ( p. 46).
Changing the
stitch length
• Activate the 2
nd
stitch length using the button on the
push button panel ( p. 47).
Increasing the
thread tension
• Activate additional thread tension using the button
on the push button panel ( p. 47).
Sewing an inter-
mediate bartack
• Sew backwards with stitch regulator ( p. 45) or
activate backwards sewing using the button on the
push button panel ( p. 47).
At seam end
Finish the seam
and remove the
sewing material
• Press the pedal fully back (position -2) and keep it
there.
End bartack is sewn, and thread is cut (if set).
Machine stops.
Needle up, sewing feet down.
• Remove the sewing material.
Condition Processes
Bekijk gratis de handleiding van Durkopp Adler D867 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D867 e-con |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 32197 MB |
