Durkopp Adler D867 e-con handleiding
Handleiding
Je bekijkt pagina 51 van 286
Operation
Operating Instructions D867 e-con - 00.0 - 06/2023 49
Functions of the buttons
Button Function
Sewing backwards
When this button is activated, the machine sews in
reverse.
Needle position
When this button is activated, the needle moves to a
specific position.
This position is determined individually via the parame-
ter settings. For more information, read the Service
Instructions.
The machine comes configured so that selecting the
button will bring the needle up to the top dead center.
Bartack suppression
This button cancels the general setting for sewing start
and end bartacks. If bartacks are on, pressing the but-
ton skips the next bartack. If bartacks are off, pressing
the button sews the next bartack.
Stitch length
When this button is selected, the machine sews with
the greater stitch length that was programmed for this
stitch length on the control panel.
Additional value needle thread tension
When this button is selected, the machine sews with
the programmed additional thread tension.
Fully customizable
The button is fully customizable.
The machine comes configured so that a press of
the button will switch on the sewing foot stroke.
+/–+/–
Bekijk gratis de handleiding van Durkopp Adler D867 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D867 e-con |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 32197 MB |
