Durkopp Adler D867 e-con handleiding
Handleiding
Je bekijkt pagina 42 van 286
Operation
40 Operating Instructions D867 e-con - 00.0 - 06/2023
Fig. 19: Changing the bobbin (2), message remaining thread monitor
Machines with automatic remaining thread monitor
If the hook thread needs to be replaced, the LED indicator lamp
(7) lights up on the machine arm.
Important
Each of the bobbins has a thread supply groove that is embedded
in the bobbin core.
Insert the bobbin in the hook in such a way that the thread supply
groove faces down. Otherwise, the remaining thread monitor will
not work.
4.8 Thread tension
Together with the hook thread tension, the needle thread tension
influences the final seam pattern. With thin sewing material,
excessive thread tension can lead to undesired ruffing and
thread breaking.
Proper setting
If the tension of needle thread and hook thread is identical,
the thread interlace lies in the middle of the sewing material.
Adjust the needle thread tension so that the desired seam pattern
is achieved with the lowest possible tension.
(7) - LED
⑦
Bekijk gratis de handleiding van Durkopp Adler D867 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D867 e-con |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 32197 MB |
