Durkopp Adler D867 e-con handleiding
Handleiding
Je bekijkt pagina 41 van 286
Operation
Operating Instructions D867 e-con - 00.0 - 06/2023 39
The bobbin change works in the same way on 1-needle machines
as on 2-needle machines. The only difference is that the hook into
which the bobbin is inserted is turned by 180 degrees for the left
and the right side.
Fig. 18: Changing the bobbin (1)
To change the bobbin:
1. Swivel up the bobbin case retainer (1).
2. Remove the empty bobbin.
3. Insert a full bobbin:
Important
Insert the bobbin so that it moves in the opposite direction of
the hook when the thread is pulled out.
4. Feed the hook thread through the slot (5) in the bobbin case
retainer.
5. Pull the hook thread under the tension spring (4).
6. Feed the hook thread through the slot (2) and pull it approx.
3 cm further.
7. Close the bobbin case retainer (1).
(1) - Bobbin case retainer
(2) - Slot
(3) - Guide
(4) - Tensioning spring
(5) - Slot
(6) - Bobbin
⑥
②
①
③④ ⑤
Bekijk gratis de handleiding van Durkopp Adler D867 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D867 e-con |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 32197 MB |
