Durkopp Adler D867 e-con handleiding
Handleiding
Je bekijkt pagina 25 van 286
Operation
Operating Instructions D867 e-con - 00.0 - 06/2023 23
To change the needle in a 1-needle machine:
1. Turn the handwheel until the needle bar (1) reaches the upper
end position.
2. Loosen the screw (2).
3. Pull the needle out towards the bottom.
4. Insert the new needle into the hole in the needle bar (1) until
it reaches the end stop.
Important
Align the needle in such a way that the groove (3) faces the
hook (4).
5. Tighten the screw (2).
Order
Always adjust the clearance between the hook and the needle after
changing to a different needle thickness ( Service Instructions).
Disturbance
An incorrect hook side clearance can cause the following
disturbances:
• Changing to a thinner needle:
• Skip stitches
• Thread damage
• Changing to a thicker needle:
• Damage to the hook tip
• Damage to the needle
Bekijk gratis de handleiding van Durkopp Adler D867 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D867 e-con |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 32197 MB |
