Durkopp Adler D867 e-con handleiding
Handleiding
Je bekijkt pagina 22 van 286
Operation
20 Operating Instructions D867 e-con - 00.0 - 06/2023
4.2 Switching on and off the machine
Fig. 2: Switching on and off the machine
Switching on the machine
To switch on the machine:
1. Press the switch (2) on the rear of the control to position I.
The button (1) on the front of the control illuminates red.
2. Press the button (1) on the front of the control.
The control and the control panel of the machine start up.
3. Press the pedal backwards when prompted to do so on
the display.
The machine performs a reference run and is afterwards
ready for sewing.
Switching off the machine
To switch off the machine:
1. Press the button (1) on the front of the machine.
Control and control panel shut down and are set to standby;
the button (1) illuminates red.
2. If necessary, press the switch (2) on the rear of the control
to position O.
The machine is no longer set to standby.
(1) - Button (2) - Switch
①②
Bekijk gratis de handleiding van Durkopp Adler D867 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D867 e-con |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 32197 MB |
