Durkopp Adler D867 e-con handleiding
Handleiding
Je bekijkt pagina 173 van 286
Maintenance
Operating Instructions D867 e-con - 00.0 - 06/2023 171
To lubricate the hook:
1. Turn the screw (1):
• counterclockwise: more oil is released
• clockwise: less oil is released
Important
The released amount of oil does not change until the operating
time has run a few minutes. Sew for several minutes before you
check the setting again.
6.3 Servicing the pneumatic system
6.3.1 Adjusting the operating pressure
Proper setting
Refer to the Technical Data ( p. 249) chapter for the permis-
sible operating pressure. The operating pressure cannot deviate
by more than ±0.5 bar.
Check the operating pressure on a daily basis.
NOTICE
Property damage from incorrect adjustment!
Incorrect operating pressure can result in damage to the
machine.
Ensure that the machine is only used when the operating
pressure is set correctly.
Bekijk gratis de handleiding van Durkopp Adler D867 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D867 e-con |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 32197 MB |
