Durkopp Adler D867 e-con handleiding
Handleiding
Je bekijkt pagina 131 van 286
Programming Commander DELTA
Operating Instructions D867 e-con - 00.0 - 06/2023 129
Icon Parameter Setting
Seam Parameter
Stitch length
Can only be adjusted before the first
stitch of a segment.
Value range
0.00 - 6.00 [mm]
(depending on the sewing equipment
and the subclass)
Needle thread tension Value range
01 - 99
Sewing foot pressure Value range
01 - 20
Sewing foot stroke Value range
1.0 – 9.0 [mm]
Max. Speed
It is possible to reduce the maximum
sewing speed at this point. The maxi-
mum sewing speed can be set in the
software at the Technician level.
Value range
0150 – 3500 [rpm]
(depending on subclass)
Automatic skip to next seam
segment
Automatic stitch count active or
inactive.
Value ranges
On/Off
Sewing stop
Automatic sewing stop at segment
end. The pedal has to be released to
continue the sewing process. 0 = Off,
1= On
Value ranges
On/Off
Bartack at seam begin
Can only be adjusted before the first
stitch of a segment.
Value range
On/Off
( p. 114)
Bartack at seam end Value range
On/Off
( p. 119)
Bekijk gratis de handleiding van Durkopp Adler D867 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D867 e-con |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 32197 MB |
