Durkopp Adler D867 e-con handleiding
Handleiding
Je bekijkt pagina 121 van 286
Programming Commander DELTA
Operating Instructions D867 e-con - 00.0 - 06/2023 119
5.8.6 Setting the Seam End parameters
There are various options for setting the Segment End parameters.
The following table lists all possible options.
Settings that are more complex and therefore require further
explanation are described in more detail after the table.
Icon Parameter Setting
Seam end parameters
Sewing foot lift after trim Value range
On/Off
Height of sewing foot lift after
trim
Value range
00–20[mm]
(depending on subclass)
Thread trimmer Value range
On/Off
Bartack at seam end Value range
On/Off
Adjustments for seam end bartack parameters
Number of stitches backwards Value range
01 - 50
Number of stitches forward Value range
01 - 50
Number of bartack sections
A bartack consists of several sections.
If the sewing direction is changed, a new
section is started. The number of sections
in a bartack can be set here.
Value range
01 - 99
Bekijk gratis de handleiding van Durkopp Adler D867 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D867 e-con |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 32197 MB |
