Durkopp Adler D867 e-con handleiding
Handleiding
Je bekijkt pagina 117 van 286
Programming Commander DELTA
Operating Instructions D867 e-con - 00.0 - 06/2023 115
Stitch length default
If this function is active, the same nee-
dle stitch length is used for the bartack
as the one set in Manual mode. If this
function is deactivated, a custom input
can be entered.
On/Off
Stitch length of backwards
stitches
Value range
01.0 - 12.0 [mm]
(depending on subclass)
Stitch length of stitches
forward
Value range
01.0 - 12.0 [mm]
(depending on subclass)
Sewing speed Value range
0000 - 2000
Single stitches per pedal
If this function is activated, each stitch in
the bartack can be sewn individually by
pressing the pedal. This function can
only be used meaningfully if the speed
is set very low for the bartack.
Value range
On/Off
Needle thread tension default
If this function is active, the same needle
thread tension is used for the bartack as
the one set in Manual mode. If this func-
tion is deactivated, a custom input can
be entered.
Value range
On/Off
Catch bartack
To ensure a safe sewing start and com-
plete sewing of the start bartack, an
additional bartack can precede the start
bartack.
Only the number of forward and back-
ward stitches can be selected.
The stitch length cannot be set individu-
ally – it corresponds to the stitch length
of the normal start bartack.
On/Off
Number of stitches backwards
Value range
01 - 50
Number of stitches forward
Value range
01 - 50
Number of bartack sections
Value range
01 10
Icon Parameter Setting
Bekijk gratis de handleiding van Durkopp Adler D867 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D867 e-con |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 32197 MB |
