Durkopp Adler D867 e-con handleiding
Handleiding
Je bekijkt pagina 104 van 286
Programming Commander DELTA
102 Operating Instructions D867 e-con - 00.0 - 06/2023
Software / Stitch
Counter
In Software mode, the bobbin
is monitored by the software
based on the number of stitches
sewn.
Counter Type
4 different counters can be applied.
The following 3 sub-items can be
set for each of the counters.
Value range
A/B/C/D
Counter value
Bobbin supply capacity in stitches.
This is a very variable value, which
depends on the size of the bobbin
and the thickness of the thread.
Value range
00000 - 99999
Sewing stop
Sewing stops and a notice is shown
on the display when the bobbin is
detected to be nearly empty.
If the parameter is not activated,
only the LEDs on the machine arm
give a warning if the bobbin is
empty.
Value range
On/Off
Sewing foot lower position Value range
On/Off
Reset necessary
It is only possible to resume sewing
after changing the bobbin and con-
firming the message on the control
panel.
Value range
On/Off
Menu item Setting option 1 Setting option 2
Bekijk gratis de handleiding van Durkopp Adler D867 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D867 e-con |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 32197 MB |
