Durkopp Adler 756 D handleiding
Handleiding
Je bekijkt pagina 85 van 410
Operation
Operating Instructions 756 D - 00.0 - 06/2024 83
Information
You can use the knurled screws (7) to adjust the tape guide (9) to the width
of the reinforcement strip (4).
10. Switch on the machine ( p. 17)
11. Press the button.
The tape brake is released, and the reinforcement strip (4) advances
continuously.
12. Press the button.
The reinforcement strip (4) is cut to the correct length.
Important
The Automatic tape feeder will not be operational unless
previously activated in the Machine config. ( p. 214).
To adjust the tape projection and the clamp speed during transport:
1. On the start screen:
Press the button.
The display switches to Program parameters ( p. 153):
Bekijk gratis de handleiding van Durkopp Adler 756 D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | 756 D |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 96944 MB |
