Durkopp Adler 756 D handleiding
Handleiding
Je bekijkt pagina 117 van 410
Operation
Operating Instructions 756 D - 00.0 - 06/2024 115
4. Press the button.
The display switches to the start screen.
4.31 Moving to the reference position of the transport clamp
The reference position is necessary in order to obtain a defined initial
position of the transport clamp.
To move to the reference position:
1. Switch on the machine ( p. 17).
The control is initialized.
The control checks whether the transport clamp is at its rear end
position. If not, the display shows the message:
Info 9000 .
2. Press the left pedal back.
The reference run starts.
The transport clamp moves to its rear end position.
The display switches to the start screen.
4.32 Performing a seam stop
To perform a seam stop:
1. Press the pedal back during the sewing process.
The current step of the sewing process is stopped immediately.
The display shows the following message
Caution 9601 .
2. Press the pedal back again.
The transport clamp moves out of the loading area.
Bekijk gratis de handleiding van Durkopp Adler 756 D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | 756 D |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 96944 MB |
