Durkopp Adler 550-D869-100 e-con handleiding
Handleiding
Je bekijkt pagina 99 van 198
Programming Commander DELTA
Instructions for use 550-D869-100 e-con - 00.0 - 01/2025 97
Setting options Max. sewing speed
5.7.3.4 Setting the Outputs (Output) parameter
This parameter provides virtual outputs that can be assigned
customer-specific functions. They can be used when customer-
specific applications require a signal from the control of the
machine.
This parameter cannot be used unless the virtual outputs have
been assigned to a physical output at the Technician level.
This requires that the parameter Additional I/O Configuration be
configured at the Technician level; for more details, refer to the
explanation in the Service Instructions.
Menu item Setting 1 Setting 2
Linear absolute Max. sewing speed
Value range
0000 - 4000
Maximum speed reached
at the upper material
thickness limit.
Min. material thickness
Value range
00.0–10.0 [mm]
Material thickness at which
the increase in speed
should start.
Max. material thickness
Value range
00.0–10.0 [mm]
Material thickness up to
which the increase in
speed should occur.
Linear with offset Offset
Value range
0000 - 4000
The current value of the
max. speed is increased/
decreased by the offset
value when the upper
material thickness limit has
been reached.
Min. material thickness
Value range
00.0–10.0 [mm]
Material thickness at which
the increase in speed
should start.
Max. material thickness
Value range
00.0–10.0 [mm]
Material thickness up to
which the increase in
speed should occur.
Bekijk gratis de handleiding van Durkopp Adler 550-D869-100 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | 550-D869-100 e-con |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 18809 MB |
