Durkopp Adler 550-D869-100 e-con handleiding
Handleiding
Je bekijkt pagina 87 van 198
Programming Commander DELTA
Instructions for use 550-D869-100 e-con - 00.0 - 01/2025 85
5.7.3.1 Setting the Bobbin monitor mode parameters
The amount of remaining thread on the bobbin can be monitored
optically or by software using this setting.
Menu item Setting option 1 Setting option 2
Off
Monitor
Monitor mode can only be used
if the additional equipment of
the remaining thread monitor is
present on the machine.
Monitor mode allows for optical
monitoring of the bobbin.
Sewing stop
Sewing stops and a notice is shown
on the display when the bobbin is
detected to be nearly empty. If the
parameter is not activated, only the
LEDs on the machine arm give a
warning if the bobbin is empty.
Value range
On/Off
Sewing foot lower position Value range
On/Off
t Clean
Duration for which the lens is blown
clear with compressed air.
The process takes place as the
thread is cut.
Value range
0000–5000 [ms]
Bekijk gratis de handleiding van Durkopp Adler 550-D869-100 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | 550-D869-100 e-con |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 18809 MB |
