Durkopp Adler 550-D869-100 e-con Handleiding (198 Pagina's)

Handleiding

Je bekijkt pagina 64 van 198

Programming Commander DELTA

62 Instructions for use 550-D869-100 e-con - 00.0 - 01/2025

5.4.1 Authorizations as Default Technician

The factory setting for the Default Technician requires that the tech-

nician enter their username and password (technician, 25483) to log

in. If selecting User Management as a Default Technician ( p. 59),

you will be presented with the following interface:

Fig. 41: Authorizations as Default Technician

On the left-hand side, you can select between the tabs (1) reserved

for roles ( p. 63) and users ( p. 67). Detailed explanations

are provided further below. To the right of the tabs you will find

the list (2) of created roles / users - varying with the tab (1) you

selected. On the far right, you will find the settings (3) associated

with the role/user you selected.

Explanation of role and user

(1) - Tab for roles and users

(2) - List of roles/users

(3) - Specify roles/users

Roles User

A role defines which authorizations

are permitted or forbidden.

It is possible to assign more than

one role to a single user.

You need to be a user to log in;

you cannot log in using a role.

You can log in as a user.

A user can be assigned one or

several roles - this is how they

receive their authorizations.

①

②

③

Bekijk gratis de handleiding van Durkopp Adler 550-D869-100 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.