Durkopp Adler 550-D869-100 e-con Handleiding (198 Pagina's)

Handleiding

Je bekijkt pagina 45 van 198

Operation

Instructions for use 550-D869-100 e-con - 00.0 - 01/2025 43

Functions of the buttons

Button Function

Sewing backwards

When this button is activated, the machine sews in

reverse.

Positioning of the needle

When this button is activated, the needle moves to a

specific position.

This position is determined individually via the parame-

ter settings. For more information, read  the Service

Instructions.

The machine comes configured so that selecting the

button will bring the needle up.

Bartack suppression

This button cancels the general setting for sewing start

and end bartacks. If bartacks are on, pressing the but-

ton skips the next bartack. If bartacks are off, pressing

the button sews the next bartack.

Stitch length

When this button is selected, the machine sews with

the greater stitch length that was programmed for this

stitch length on the control panel.

Value of the additional needle thread tension

When this button is selected, the machine sews with

the programmed additional thread tension.

Fully customizable

The button is fully customizable.

The machine comes configured so that a press of the

button will switch on the underarm lighting.

+/–+/–

Bekijk gratis de handleiding van Durkopp Adler 550-D869-100 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.