Durkopp Adler 550-D869-100 e-con Handleiding (198 Pagina's)

Handleiding

Je bekijkt pagina 40 van 198

Operation

38 Instructions for use 550-D869-100 e-con - 00.0 - 01/2025

4.9 Adjusting the needle thread regulator

The needle thread regulator determines the tension applied to

guide the needle thread around the hook.

Proper setting

The loop of the needle thread slides at low tension over the thickest

point of the hook.

Fig. 16: Adjusting the needle thread regulator

To adjust the needle thread regulator:

1. Loosen the screw (2).

• To increase the tension: Slide the needle thread

regulator (1) to the right

• To reduce the tension: Slide the needle thread

regulator (1) to the left

2. Tighten the screw (2).

WARNING

Risk of injury from needle tip and moving parts!

Puncture, cutting and crushing possible.

Turn off the machine before adjusting the needle

thread regulator.

(1) - Needle thread regulator (2) - Screw

①

②

Bekijk gratis de handleiding van Durkopp Adler 550-D869-100 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.