Durkopp Adler 550-D869-100 e-con handleiding
Handleiding
Je bekijkt pagina 101 van 198
Programming Commander DELTA
Instructions for use 550-D869-100 e-con - 00.0 - 01/2025 99
Stitch length default
If this function is active, the same
needle stitch length is used for the
bartack as the one set in Manual mode.
If this function is deactivated, a custom
input can be entered.
On/Off
Stitch length of stitches forward
Value range
0.1–9.0 [mm]
(depending on subclass)
Stitch length of backwards stitches
Value range
01.0–12.0 [mm]
(depending on subclass)
Speed in bartack Value range
0000 - 2000
Single stitches per pedal
If this function is activated, each stitch in
the bartack can be sewn individually by
pressing the pedal. This function can
only be used meaningfully if the speed
is set very low for the bartack.
Value range
On/Off
Needle thread tension default
If this function is active, the same
needle thread tension is used for the
bartack as the one set in Manual mode.
If this function is deactivated, a custom
input can be entered.
Value range
On/Off
Catch bartack
To ensure a safe sewing start and
complete sewing of the start bartack, an
additional bartack can precede the start
bartack.
Only the number of forward and
backward stitches can be selected.
The stitch length cannot be set
individually – it corresponds to the stitch
length of the normal start bartack.
On/Off
Number of stitches backwards
Value range
01 - 50
Number of stitches forward
Value range
01 - 50
Number of bartack sections
Value range
01 - 10
Button Parameter Settings
Bekijk gratis de handleiding van Durkopp Adler 550-D869-100 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | 550-D869-100 e-con |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 18809 MB |
