Draytek VigorAP 920RPD handleiding
Handleiding
Je bekijkt pagina 12 van 182
4
I-2-2 Connecting Ethernet Cable(s)
Refer to the following steps to attach the Ethernet cable and waterproof head. (Take VigorAP 920RP
as an example.)
1. Remove the cable cover for Ethernet Port (e.g., Port 1 PoE In).
2. Before connecting, verify that the cable has a rubber seal and that it is not damaged.
To prevent the enclosure from water leakage, make sure the Ethernet cable gland and the
rubber gasket are present and installed properly.
3. Inserting RJ-45 connector into the port.
4. Use an adjustable wrench and tighten the thread-lock sealing nut with torque 10 kgf-cm.
Warning:
Do not open the top cover of the device.
Installation during thunderstorms could be dangerous.
Bekijk gratis de handleiding van Draytek VigorAP 920RPD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Draytek |
| Model | VigorAP 920RPD |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 27831 MB |
Caratteristiche Prodotto
| Kleur van het product | Wit |
| Gewicht | 1700 g |
| Breedte | 160 mm |
| Diepte | 180 mm |
| Hoogte | 485 mm |
