Draytek VigorAP 920RPD handleiding
Handleiding
Je bekijkt pagina 10 van 182
2
I-1-1 LED Indicators and Connectors
Before you use the Vigor modem, please get acquainted with the LED indicators and connectors
first.
LED Status Explanation
Off The system is not ready or has failed. ACT
Blinking The system is ready.
On Wireless function is ready.
Off Wireless function is not ready.
2.4G / 5G
Blinking Data is being transmitted (sending/receiving).
5G Signal (For D Model)
The signal strength (excellent) > -50dBm.
5G Signal (For D Model)
The signal strength (good) is between -66dBm ~
-51dBm.
5G Signal (For D Model)
The signal strength (fair) is between -73dBm~ -67dBm.
5G Signal (For D Model)
No signal or the signal strength is <-73dBm.
Interface Description
Factory Reset Restore the default settings. Usage: Switch on the access point. Press and
hold reset button for at least 10 seconds. The router will restart with the
factory default configuration.
Before pressing the button, the cover should first be removed by rotating
it with a torque of 13 kgf-cm. After the access point has been reset,
replace the cover and lock it with the same amount of torque.
Port 1 PoE In Connector for receiving power from another device.
PoE Out (for P Model) Connector for supplying power to another device.
Note:
For the sake of security, make the accessory kit away from children.
Bekijk gratis de handleiding van Draytek VigorAP 920RPD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Draytek |
| Model | VigorAP 920RPD |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 27831 MB |
Caratteristiche Prodotto
| Kleur van het product | Wit |
| Gewicht | 1700 g |
| Breedte | 160 mm |
| Diepte | 180 mm |
| Hoogte | 485 mm |
