Drawmer MQ-1 handleiding

12 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 6 van 12
6
DRAWMER
CONTROL DESCRIPTION
GAIN +20 to -20dB
Typically, this Input Gain control is used to match
the output of the preceding device/slot to the input
needs of the equaliser bands that the signal will
pass through.
If the input is too low the signal of every equaliser
band will need to be boosted just to reach the
optimum output level. If the input is too high every
band will have less headroom to boost the signal
before clipping occurs.
BYPASS Switch
With the Bypass switch active the input signal
is routed to the output with no signal processing
taking place. Use it to provide A/B comparisons.
CRUSH On / O󰀨
Adds a xed time constant, auto gain makeup
compressor and introduces some musically
pleasing harmonics to all of the EQ bands.
The Crush button is applied to frequencies that
are boosted and not those that are cut, and so
it’s effectiveness will vary depending on the
frequency, the amount of boost applied and also
on the instrument that it is applied to. Use it in
the lower frequencies to fatten up the kick, tom or
snare drums, bass guitar and other elements of
the rhythm section. In the mid frequencies it will
help to warm the mix and enhance the presence.
It will thicken the guitars and add punch to the
percussion, increase the attack of a piano, as well
as help to bring out the raspiness in a vocal, for
example. At the high frequencies it will bring out
the shimmer of cymbals and brighten the string
instruments.
The e󰀨ect is progressive, so as more boost is
added to the band the CRUSH e󰀨ect is more
apparent. If you wish to apply much more boost
to a band in order to obtain more ‘crush’ the GAIN
control can be used to reduce the levels should
the signal reach the rails. Use the switch to listen
to A/B comparisons to hear the e󰀨ectiveness of
the feature.
CHAPTER 2

Bekijk gratis de handleiding van Drawmer MQ-1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkDrawmer
ModelMQ-1
CategorieNiet gecategoriseerd
TaalNederlands
Grootte2453 MB