Draper Storm Force 08090 handleiding

Handleiding

1234567891011121314151617181920/ 20

Afdrukken

Je bekijkt pagina 8 van 20

5. Health and Safety Information

• ALWAYS disconnect the product from the power

supply and allow it to cool before attempting to move,

maintain or empty the boiler and steam hose.

•  NEVER insert foreign objects into any openings on

the product unless otherwise instructed in this

manual.

• NEVER stand or place objects on the boiler or hose.

• Transport the product using the built-in carry handle

ONLY.

• NEVER carry the product by the power cable or steam

hose.

•  DO NOT drag the boiler using the steam hose.

5.3 Connection to the Power Supply

This appliance is supplied with an approved plug and

cable for your safety. The value of the fuse tted is

marked on the pin face of the plug. Should the fuse need

replacing, ensure the substitute is of the correct rating,

approved to BS 1363/A and ASTA or BS Kite marked.

ASTA

BSI

The fuse can be replaced by removing the cover using a

small plain slot screwdriver and removing the broken

fuse from its holder. This should only be performed by

suitably qualied personnel.

If the power supply cord is damaged, it must be replaced

with a special cable available from Draper Tools or its

authorised service agent.

This is a Class I* product and is designed for connection

to a power supply matching that detailed on the rating

label and compatible with the plug tted.

If an extension lead is required, use an approved and

compatible lead rated for at least 10A that includes a

protective earthing conductor. Follow all the instructions

supplied with the extension lead.

If the plug must be connected in an outside environment,

ensure that the outlet or extension lead is suitably

designed for outside use.

Important: Always follow the extension lead instructions

regarding maximum load while the cable is wound. If in

doubt, unwind the entire cable. A coiled extension lead

generates heat which could melt the lead and cause a

re.

Important: Draper Tools strongly recommends that this

product is used with a residual current device (RCD), e.g.

Draper Stock Nos. 69307 or 89301. ALWAYS read the

manufacturer instructions for any RCD use. For your

safety, if an extension cable is used, the RCD MUST be

installed at the power outlet and not into the extension

lead.

*Earthed: This product requires an earth connection to

protect against electric shock from accessible

conductive parts in the event of a failure of the basic

insulation.

5.4 Residual risk

The safety instructions in this manual cannot account for

all possible conditions and situations that may occur.

Exercise common sense and caution when using this

product and protect against any additional conceivable

risks.

– 8 –

1234567891011121314151617181920/ 20

Bekijk gratis de handleiding van Draper Storm Force 08090, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Stoomreiniger