Draper Expert 82471 handleiding
Handleiding
Je bekijkt pagina 8 van 12
6.3 Anchor Points
Important: It is essential that the chosen anchor points
are positioned in such a way to minimise the likelihood
of free fall and the potential for fall damage. The work
should also be carried out in such a way to minimise
this risk.
Anchor points are the xtures at which the fall arrest
system is xed to the wall or platform. Where possible,
anchor points should be located level to or above the
point at which the harness is attached to the fall arrest
system. This reduces the total ground clearance from a
maximum of 4m to 2m or less. Anchor points should also
be directly in line vertically with the body as much as
possible to reduce the likelihood of swing falls.
Anchor points must be able to withstand a minimum of
12kN (2,700lbf) of force from a fall. Use certied,
permanently installed anchor points where possible.
6.4 Fitting the Harness (Fig.4 – Fig.6)
4 Fig.
1. Open the leg loop (3) buckles and step in.
5 Fig.
2. Hold the shoulder straps (2) and put the harness on
like a jacket.
6 Fig.
3. Fasten and adjust the leg loops.
4. Adjust the shoulder straps.
5. Stow the excess webbing using the strap retainer on
the shoulder strap.
6. Closs the harness.
6.5 Adjustment and Suspension Test
(Fig.7)
7
Fig.
• The harness must be adjusted to t snugly to reduce
the risk of injury in case of a fall.
• Move around and carry out a suspension test (hang in
the harness) from the dorsal attachment point with
your equipment to verify that the harness ts and
adjusted correctly.
– 8 –
Bekijk gratis de handleiding van Draper Expert 82471, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Draper |
| Model | Expert 82471 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2198 MB |
