Draper Expert 23311 handleiding
Handleiding
Je bekijkt pagina 2 van 4
5. Prepare the brake pipe; see 4. Preparing the
Brake Pipe.
6. Ensure that the tube nut (7) (not supplied) is
installed onto the brake pipe (8), then lightly
lubricate the end of the brake pipe using brake
uid or an appropriate oil and insert it through
the rear of the die.
3 Fig.
(8)
(7)
Important: Ensure that the end of the pipe is
ush with the face of the die.
7. Close the die clamp (3) and tighten the die clamp
lever (2) to secure the die in position.
Important: The die clamp must be very tight to
prevent the die and pipe from moving during the
operation. After tightening, ensure that the die
and pipe are correctly positioned.
8. Insert the appropriate punch slider (C) (D) into the
slider mount (5) with the required OP. 1 punch
facing towards and directly in line with the pipe.
4 Fig.
(3)(2)
(C/D)
(7)
Important: The punch number identied in the
chart (see 6. Flaring Reference Chart)
corresponds with the number at the top of the
punch slider label.
9. Pull the press lever (9) to engage the punch with
the end of the pipe until rm resistance is felt,
then return the lever to its original position.
5 Fig.
(9)
10. If the chart identies a second operation
required for the are (SAE Double ares only),
move the slider so that the OP. 2 punch is
aligned with the pipe and pull the press lever to
apply the are.
11. Return the press lever (9) to its original position,
then loosen the die clamp lever (2) and open the
die clamp (3).
6 Fig.
(9)
(3)
(2)
12. Remove the die from the die socket and extract
the pipe from the die. If necessary, tap the die
gently on a suitable surface to release the pie
from the die.
13. Check the quality of the are to ensure that the
pipe did not move during the operation and
blow any residual debris from the pipe.
– 2 –– 2 –
Bekijk gratis de handleiding van Draper Expert 23311, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Draper |
| Model | Expert 23311 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 619 MB |
