Draper Expert 23310 handleiding

4 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 2 van 4
5. Prepare the brake pipe; see 4. Preparing the
Brake Pipe.
6. Ensure that the tube nut (7) (not supplied) is
installed onto the brake pipe (8), then lightly
lubricate the end of the brake pipe using brake
uid or an appropriate oil and insert it through
the rear of the die.
3Fig.
(8)
(7)
Important: Ensure that the end of the pipe is
ush with the face of the die.
7. Close the die clamp (3) and tighten the die
clamp lever (2) to secure the die in position.
Important: The die clamp must be very tight to
prevent the die and pipe from moving during the
operation. After tightening, ensure that the die
and pipe are correctly positioned.
8. Rotate the turret (5) until the correct OP.1 punch
is directed towards the pipe.
4Fig.
(2)
(3) (5)
Important: The punch number identied in the
chart (see 6. Flaring Reference Chart)
corresponds with the number in the blue ring at
the outer edge of the turret label. The numbers
are also marked on the nut of each punch.
9. Pull the press lever (9) to engage the punch with
the end of the pipe until rm resistance is felt,
then return the lever to its original position.
5Fig.
(9)
10. If the chart identies a second operation
required for the are (SAE Double ares only),
rotate the turret to the required OP. 2 position
and pull the press lever to engage the punch.
11. Return the press lever (9) to its original position,
then loosen the die clamp lever (2) and open the
die clamp (3).
6Fig.
(2)
(3)
(9)
12. Remove the die from the die socket and extract
the pipe from the die. If necessary, tap the die
gently on a suitable surface to release the pipe.
13. Check the quality of the are to ensure that the
pipe did not move during the operation and
blow any residual debris from the pipe.
– 2 –– 2 –

Bekijk gratis de handleiding van Draper Expert 23310, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkDraper
ModelExpert 23310
CategorieNiet gecategoriseerd
TaalNederlands
Grootte544 MB