Draper Expert 17766 handleiding
Handleiding
Je bekijkt pagina 7 van 8
– 7 –
EN
5. Maintenance, Storage and Disposal
5.1 General Maintenance and Storage
Important: A torque wrench is a precision tool. Failure to
calibrate your tool regularly or to store correctly will
constitute misuse and invalidate your warranty.
The torque wrench is lubricated for life and should not
be oiled. The only exception is the head which may be
lubricated as needed for smooth operation.
Keep the product free from grease, chemicals and
other substances to prevent damage from corrosion.
Wipe the wrench with a dry cloth only.
DO NOT use solvents or chemicals that may interfere
with the internal lubrication.
Store this product in the storage case supplied, in a
clean and dry location, out of direct sunlight and out
of reach of children.
ALWAYS return the torque wrench to its lowest setting
before storage. Failure to do this will weaken the
internal springs and distort the calibration of the tool.
Frequently used tools should be calibrated
more often.
NEVER attempt to repair or adjust this product.
Servicing, repairs and calibration must be carried out
ONLY
If the torque wrench fails to function correctly for any of
the following reasons, return the tool to an authorised
Draper Tools agent:
The ratchet fails to function.
The handle lock fails to function.
The wrench does not “click” at the set torque.
The handle does not break away at the set torque.
At the end of its working life, dispose of the product
recycle where possible.
5.2 Calibration
Have the torque wrench calibrated at least once a
calibration centre. For the rst recalibration,
the period of validity starts with user’s rst
operation of the torque tool.
calibration routine is required, the calibration interval
shall be chosen on the basis of the factors of
operation such as required accuracy, frequency of
use, typical load during operation as well as ambient
conditions during operation and storage conditions.
The interval should be decided according to the user’s
procedures for the control of test devices and by the
requirements of the user.
The torque tool shall be recalibrated when it has been
subjected to an overload greater than 125% of
maximum rated load and after repair, or after any
in measurement.
NOTE: the recalibration routine for the torque wrench
is NOT covered by the product warranty.
Should the tool develop a fault, return the complete tool
to your nearest distributor or contact Draper Tools
directly. Proof of purchase must be provided.
If, upon inspection, it is found that the fault occurring is
due to defective materials or workmanship, repairs will
be carried out free of charge. This warranty covers parts
and labour for the lifetime of the product. However, if the
tools are hired out, the warranty period is 90 days from
the date of purchase.
This warranty does not apply to any consumable parts,
batteries or normal wear and tear, nor does it cover any
damage caused by misuse, careless or unsafe handling,
alterations, accidents, or repairs attempted or made by
any personnel other than the authorised Draper Tools
repair agent.
Visit drapertools.com/warranty for full details.
6. Warranty
Bekijk gratis de handleiding van Draper Expert 17766, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Draper |
| Model | Expert 17766 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 873 MB |
