Draper D20 97533 handleiding
Handleiding
Je bekijkt pagina 7 van 11
–
7
–
6. PREPARING THE PRESSURE
WASHER
6.1 ASSEMBLY – FIGS. 1 - 5
Note: The power nozzle has two working modes: short
lance and extension lance.
1. Attaching lance (10) or (11) to the power nozzle.
1
FIG.
1
2
2. Attaching variable spray pattern nozzle (12) to the
lance.
Note: When attaching, align the two projections on the
lance with the grooves of the power nozzle.
2
FIG.
2
1
(12)
3. Attaching the suction pipe to the power nozzle, via
bucket or other clean water source (*).
3
FIG.
4
FIG.
(8)
Note: After the suction pipe (8) is attached, check the
connection by gently pulling upon the hose. It should not
be pulled off.
5
FIG.
*This machine is not suitable for connecting to a tap. It
is designed to draw water from a bucket or other clean
water source.
7. BASIC OPERATIONS
Note: At the rst use, you need to empty the air in pipe,
place the power nozzle below waist level (<5ft/1.5m),
then attach the extension lance and set it at high
pressure. Do not start working until the water goes up
along the hose and sprays out. This could take up to 30
seconds or more depending on the fresh water source.
7.1 SELECTING THE NOZZLE
PATTERN FIG. 6
Note: Choose a suitable nozzle pattern according to
your work.
Bekijk gratis de handleiding van Draper D20 97533, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Draper |
| Model | D20 97533 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2782 MB |
