Draper D20 08096 handleiding
Handleiding
Je bekijkt pagina 12 van 22
8. PREPARING THE BACKPACK SPRAYER
8.2 MOUNTING AND ADJUST THE
METAL SPRAY LANCE – FIGS. 4 & 5
− To mount the metal spray lance, align the axis
of spray lance and spray handle, then turn the
middle screw of the clockwise and fasten.
(see g. 4)
− The metal spray lance is a telescopic one,
which can be extended up to 1m long.
− To adjust the length, just do as follows
(see g. 5):
- Loosen the middle screw nut.
- Grasp the head then pull it outer forward
- After get your desired length, turn the
middle screw to fasten it.
8.3 ATTACHING THE HOSE
The hose comes preassembled to the trigger handle. If it becomes loose, follow the
instructions below.
− Slide the nut on the hose away from the hose end.
− Following this rule will reduce the risk of serious personal injury.
− Insert the hose end into the hose connector. Make sure the connection is secure.
− Slide the nut over the opening and hose end. Hand tighten. Do not over tighten.
4 FIG.
5 FIG.
(3)
(5)
– 12 –
Bekijk gratis de handleiding van Draper D20 08096, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Draper |
| Model | D20 08096 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3102 MB |
