Draper 84131 handleiding
Handleiding
Je bekijkt pagina 5 van 12
– 5 –
4. Health and Safety Information
Important: Read all the Health and Safety instructions
before attempting to operate, change accessories,
maintain or repair this product. Failure to follow these
instructions may result in injury or damage to the user,
the product or the workpiece
4.1 General Health and Safety
Precautions
• ONLY qualied and trained operators should use or
adjust the air tool.
• DO NOT modify this tool. Modications can reduce
the eectiveness of safety measures and increase the
risks to the operator.
• Retain the safety instructions for future reference and
use by the operator.
• NEVER misuse the tool and DO NOT use the tool if it
has been damaged.
• Inspect the tool periodically to verify that the ratings
and markings required are attached and legible.
• Keep bystanders away during operation.
• ALWAYS Wear appropriate personal protective
equipment (PPE) including eye, ear and hand
protection.
• Have your tool serviced by a qualied repair person
using only identical replacement parts.
4.2 Additional Safety Instructions for
Compressed Air
WARNING! Compressed air can cause severe
injury.
− ALWAYS turn o and disconnect the air supply
before changing accessories, making any
adjustments to the product or leaving it
unattended.
− NEVER direct this product towards yourself or
others.
− Ensure that compressed air is not blocked by or in
contact with any part of your body.
• ONLY use clean, dry and regulated compressed air.
WARNING! NEVER use oxygen, combustible
gases or other bottled gases as a supply for
this product. Use of these substances may
cause the product to explode.
• Draper Tools recommends the use of a whip hose
between the tool and the air supply to reduce
vibration.
WARNING! Whipping hoses can cause severe
injury. ALWAYS check for and replace
damaged or loose hoses and ttings.
• Ensure that the product is compatible with the air
supply before use.
• Ensure all connections are securely tightened.
• Where universal twist couplings (claw couplings) are
used, lock pins must be installed and whip check
safety cables must be used to safeguard against
possible hose-to-tool or hose-to-hose failure.
• DO NOT exceed the maximum stated air pressure.
• The use of an inline water separator, lubricator and
pressure regulator should be used to control the
pressure of the air being supplied to the tool.
• DO NOT obstruct the ability of the trigger to release
once depressed.
• NEVER carry the tool by the air line.
4.3 Additional Safety Instructions for Air
Needle Scalers
WARNING! Risk of injury
to persons.
− Keep hands away from the needles.
− High speed splinters may be emitted from the air
needle scaler during operation.
• ALWAYS wear a correctly tted dust mask when
using this needle scaler.
• Where dust or fumes are created, the priority should
be to control them at the point of emission.
• Disconnect the tool from the energy supply before
changing the inserted tool or accessory.
• Failure of the workpiece, accessories or even of the
inserted tool itself can generate high-velocity
projectiles.
• ALWAYS wear impact-resistant eye protection during
the operation of the needle scaler. The grade of
protection required should be assessed for each use.
• For overhead work, wear a safety helmet. The risk to
others should also be assessed at this time.
• Ensure that the workpiece is securely xed.
• NEVER operate a tool unless the inserted tool is
retained with a proper retainer.
• To avoid injury, retainer parts shall be replaced when
they become worn, cracked or distorted.
EN
Bekijk gratis de handleiding van Draper 84131, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Draper |
| Model | 84131 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1767 MB |
