Draper 84126 handleiding
Handleiding
Je bekijkt pagina 8 van 12
– 8 –
Important: Before preparing or adjusting this product, read and understand all the safety instructions listed in
this manual.
6.1 Preparing the Air Supply for Use
1 Fig.
6. Preparation Instructions
• This air tool operates at a max. pressure of 6.2bar (90psi).
• ISO grade 22–32 (SAE grade 5W–15W) monograde oil
should be used in this air tool.
• During use, the oil must be constantly supplied to the
equipment to ensure complete lubrication and
optimum performance.
• The compressed air system must be controlled by a
combination pressure regulator, in-line lubricator and
moisture lter. This will ensure a constant supply of
dry air at all times, provided it is properly maintained.
Important: Always check the machine operating
pressure before use.
• Water in the compressor tank may cause considerable
corrosion to air tools; the compressor should be
drained daily to avoid excessive water in the air
supply. Dirty or wet air can signicantly shorten the
lifespan of the product.
• When using an air tool with a hose over 25ft long,
Draper Tools recommends increasing the bore of the
hose to the next largest available size (i.e. increase
3/8" to 1/2"). This will ensure adequate pressure and
volume of air to power the tool.
6.2 Connection to the Air Supply
Important: Always disconnect from the air supply before assembling, carrying out adjustments,
servicing or maintenance.
2 Fig.
To connect the air ratchet to an air line, a 1/4" BSP male
thread whip hose (A) will be required.
• Wind a length of PTFE tape (B) around the thread of
the whip hose.
• Unscrew and remove the bung from the air inlet (4).
• Attach the hose via the 1/4" BSP air inlet (4).
The connection must be tight for an airtight union.
(B)
(A)
Bekijk gratis de handleiding van Draper 84126, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Draper |
| Model | 84126 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1668 MB |
