Draper 84126 handleiding

12 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 10 van 12
– 10 –
Problem Possible Cause Remedy
Tool will not operate. Motor or throttle seized with dirt. Check for dirt in air inlet.
Pour air tool lubricating oil into air inlet.
Operate tool in short bursts.
If motor fails to operate, contact Draper
Tools for advice.
Tool operates slowly. Rotor vane seized. Pour air tool lubricating oil into air inlet.
Operate tool in short bursts.
If still not functional, contact Draper Tools
for advice.
Spindle seized. Motor vane broken. Contact Draper Tools for advice.
Tool will not switch o. ‘O’ ring throttle valve dislodged. Replace ‘O’ ring or contact Draper Tools for
advice.
8.3 Troubleshooting
WARNING!
• Disconnect from the air supply before carrying out
any adjustments, servicing or maintenance.
• Replace the bung in the end of the air line inlet (4)
when the tool is disconnected from the air supply and
before storing.
8.1 Every-Day Maintenance Checks
Before connection to the air supply:
• Drain the compressor reservoir of condensate.
• Drain the air lines of condensate.
• Drain the combined separator lter, regulator,
water trap.
• Fill up the combined separator lter, regulator,
lubricant reservoir.
• Check the line pressure is correct for the tool.
8.2 After Use Maintenance Checks
• Repeat the above procedures.
• Lubricate the tool with approximately 1.5ml of oil
directly down the air inlet.
• When not in use store in a dry clean place out of the
reach of children.
8. Maintenance and Troubleshooting
For spare parts, servicing, and repair and replacement
options, please contact the Draper Tools Product
Helpline for details of your nearest authorised agent.
Draper Tools will endeavour to hold any spare parts,
if applicable, for seven years from the date that it sells
the nal matching stock item.
Any servicing or repairs carried out by unauthorised
personnel or installation of spare parts not supplied by
Draper Tools will invalidate your warranty.
At the end of its working life, dispose of the product
responsibly and in line with local regulations.
Recycle where possible.
9. Spares, Returns and Disposal

Bekijk gratis de handleiding van Draper 84126, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkDraper
Model84126
CategorieNiet gecategoriseerd
TaalNederlands
Grootte1668 MB