Draper 80947 handleiding
Handleiding
Je bekijkt pagina 10 van 20
– 10 –
EN
4 Fig.
3 Fig.
2 Fig.
1 Fig.
Important: Before use, read and understand all the
safety instructions listed in this manual.
WARNING! DO NOT connect the product to a power
supply until it is fully assembled.
1. Attach the castors to the base plate (Fig. 1):
a. Pass each of the castor assembly (B1) bolts
through its thick M8 washer (B3) and up through
the sunken holes of the base plate.
b. Place a thin M8 washer (B2) onto the each bolt
and secure it in place with an M8 dome nut (B4).
2. Fix the motor to the motor support:
a. Align the holes in the base of the motor/ducting
unit (K) and the motor support (J).
b. Pass the four M8 x 25mm bolts (N) each through a
washer (Q) and up through the underside of the
motor support and motor/ducting unit (Fig. 2).
c. Secure each bolt with another washer (Q) and an
M8 nut (R) (Fig. 3).
3. Attach the motor/ducting unit and motor support to
the base plate (Fig. 3):
a. Align the motor and support assembly with the six
holes on the base plate.
b. Pass six M8 x 16mm bolts (O) each through a
washer (Q) and down through the holes in the
motor and support assembly, and tighten them
securely. The holes in the base plate are threaded
to receive the attaching bolts.
4. Attach the extraction chute (H) to the ducting unit
(Fig. 4):
a. Place a gasket (G), ridged side up, and the
extraction chute onto the square opening so that
the holes align.
Important: The extraction chute should curve
back over the ducting unit.
b. Pass eight M8 x 16mm bolts (O) each through a
washer (Q) and down through the assembly, then
tighten them securely.
7. Assembling the Dust Extractor
(B2, B4)
(A)
(B1)
(N) (J)
(K)
(O, S)
(G)
(B3)
(R, Q)
(O, Q)
Bekijk gratis de handleiding van Draper 80947, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Draper |
| Model | 80947 |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 3007 MB |
