Draper 58330 handleiding
Handleiding
Je bekijkt pagina 3 van 8
– 3 –
• Disconnect the fan from the power supply and wait for
the blades to stop rotating before moving, adjusting,
servicing or carrying out any maintenance.
• Complete the assembly procedure prior to connecting
to the power supply or switching on after cleaning.
• NEVER insert ngers, pencils or any other objects
through the protective grille while the fan is running.
• Before removing the grille, ensure the fan is switched
o, disconnected from the power supply and the
blades have stopped rotating.
• ALWAYS operate the fan on a secure, rm and
level surface.
• DO NOT use the fan near an open window, as rain can
create an electrical hazard.
• If the power supply cord becomes damaged it should
be replaced immediately.
• DO NOT use this fan with an independent externally
connected speed control device.
• DO NOT cover the fan when in use.
• DO NOT use in close proximity to a bath, shower or
swimming pool.
3.2 Connection to the Power Supply
CAUTION!
Risk of electric shock. DO NOT open.
This appliance is supplied with an approved plug and
cord for your safety.
Plug Fuse Replacement
Stock Nos: 70045 and 58330 – 230V only
The value of the fuse tted is marked on the pin face
of the plug. Should the fuse need replacing, ensure
the substitute is of the correct rating, approved to
BS 1363/A and ASTA or BS Kite marked.
ASTA
BSI
Replacement of the fuse should only be performed
by suitably qualied personnel.
If the power supply cord is damaged, it must be replaced
by Draper Tools, an authorised service agent or similarly
qualied personnel in order to avoid a hazard.
The damaged or incomplete plug, when cut from the
cord, shall be disabled to prevent connection to a live
electrical outlet.
This product is Class I* and is designed for connection to
a power supply matching that detailed on the rating label
and compatible with the plug tted.
If an extension lead is required, use an approved and
compatible lead rated for this product. Follow all the
instructions supplied with the extension lead.
Important: Always follow the extension lead instructions
regarding maximum load while the cable is wound.
If in doubt, unwind the entire cable. A coiled extension
lead generates heat which could melt the lead and cause
a re.
*Earthed: This product requires an earth connection
to protect against electric shock from accessible
conductive parts in the event of a failure of the
basic insulation.
3.3 Residual Risk
The safety instructions in this manual cannot account
for all possible conditions and situations that may
occur. Exercise common sense and caution when
using this product and protect against any additional
conceivable risks.
Bekijk gratis de handleiding van Draper 58330, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Draper |
| Model | 58330 |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 1730 MB |
