Draper 30883 handleiding
Handleiding
Je bekijkt pagina 3 van 4
4. Product Overview
(1) Saddle
(2) Centre column
(3) Locking tab
(4) Locking handle
(5) Axle base
5. Assembly
1 Fig.
1. Insert the centre column (2) into the base frame (5).
2. Ensure the side of the column with the teeth engages
with the locking handle.
3. Use a hammer and punch to bend the locking tab (3)
in after inserting the columns to secure in place.
6. Using the Axle
1. Refer to the vehicle manufacturer’s instruction
manual for the recommended jacking/support points.
2. Check to ensure jacking/support points are in
good condition. Position the stands beneath the
support points.
3. Adjust the stand height by holding the locking handle
and lifting the column to the required height.
Then push the locking handle down to lock in place.
4. Carefully and slowly lower the vehicle onto the stands
ensuring the load bearing point sits in the centre of
the saddles. Check the stands are stable.
• Always ensure that no persons or objects are in the
way before lowering the vehicles onto the stands.
• Follow the illustrations for safe usage on the side of
the axle base (see Fig.2).
(1)
(2)
(3)
(4)
(5)
(3)
Bekijk gratis de handleiding van Draper 30883, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Draper |
| Model | 30883 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 690 MB |
