Draper 28814 handleiding
Handleiding
Je bekijkt pagina 7 van 20
5. HEALTH AND SAFETY INFORMATION
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing
away from moving parts. Loose clothes, jewellery or long hair can be caught in
moving parts.
g) If devices are provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used. Use of dust collection can reduce
dust-related hazards.
h) Do not let familiarity gained from frequent use of tools allow you to become
complacent and ignore tool safety principles. A careless action can cause severe injury
within a fraction of a second.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your application. The
correct power tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or remove the battery pack, if
detachable, from the power tool before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
e) Maintain power tools and accessories. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired before use. Many accidents are
caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended could result
in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow for safe handling and control of the tool in
unexpected situations.
5) Service
a) Have your power tool serviced by a qualified repair person using only identical
replacements parts. This will ensure that the safety of the power tool is maintained.
5.2 ADDITIONAL SAFETY INSTRUCTIONS FOR 12V DC INVERTERS
− Warning! Under normal operation, lead-acid batteries generate explosive gasses.
− Warning! Battery acid is extremely corrosive and harmful, particularly when in contact with skin
or clothing. Any splashes to skin or clothing must be washed immediately with soap and cold
running water. If battery acid comes into contact with the eyes you must rinse with cool,
clean running water for at least 15 minutes and seek immediate medical attention.
− Never smoke, create sparks or naked flames when working around vehicle engines
or batteries.
− Corroded or dirty battery terminals must be cleaned before attachment to the inverter leads.
− To minimise the risk of short circuited current, or an explosion, avoid the use of metallic tools
when working in close proximity to the vehicle’s battery terminals.
– 7 –
Bekijk gratis de handleiding van Draper 28814, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Draper |
| Model | 28814 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2902 MB |
