Draper 28369 handleiding
Handleiding
Je bekijkt pagina 2 van 2
Helpline: +44 (0) 23 8049 4344 Sales Desk: +44 (0) 23 8049 4333
General Enquiries: +44 (0) 23 8026 6355 Website: drapertools.com
Email: sales@drapertools.com
Draper Tools Limited, Hursley Road, Chandler’s Ford, Eastleigh, Hampshire, SO53 1YF, UK
2. Screw the water trap outlet (3) onto the air
tool or other connecting inlet.
3. Wrap a length of PTFE tape around the
inlet of the water trap inlet (2) and attach
the desired coupling.
4. Connect the inlet to the air line.
After use, hold the product upright and press
the valve (4) to release any water from the
reservoir.
6. Maintenance and
Disposal
Important: Always disconnect the product
from the air line before attempting to
maintain the product.
• Drain the reservoir weekly and before
storing.
• Replace the water trap if it no longer
creates an airtight seal or becomes visibly
dirty on the inside.
• Store the product in a clean and dry
environment, out of reach of children.
• DO NOT allow dirt, dust and other debris
to enter the product.
At the end of its working life, or when it can
no longer be repaired, dispose of the product
according to local regulations.
7. Explanation of Symbols
Read the instruction manual
Warning!
1/4"
BSP
Thread size
Maximum pressure
Operating pressure
Contact your local authority for details of
collection schemes in your area.
Copyright © Draper Tools Limited
3.2 Additional Safety
Instructions for Air Tools
• Compressed air can cause severe injury.
− ALWAYS turn o and disconnect the
air supply before leaving the product
unattended.
− Ensure that compressed air is not
blocked by or in contact with any part
of your body.
• ONLY use clean, dry and regulated
compressed air.
WARNING! NEVER use oxygen,
combustible gases or other
bottled gasses as a supply for this
product. Use of these substances
may cause the product to explode.
• Ensure that the product is compatible with
the air supply before use.
• Ensure all connections are securely
tightened.
• DO NOT exceed the maximum stated air
pressure.
4. Product Overview
Carefully remove
the product from the
packaging and examine
it for any signs of damage
that may have occurred
during shipment.
(1) Filter
(2) Inlet
(3) Outlet
(4) Valve
Please visit drapertools.com for our full
range of accessories and consumables.
5. Operation
Important: Before using this product, read
and understand all the safety instructions
listed in this manual.
1. Wrap a length of PTFE tape around the air
line inlet of the air tool or other air line
component to which the product will be
connected.
Important: For a more secure seal, the
PTFE tape should be wrapped in the
opposite direction to the thread.
(3)
(1)
(4)
(2)
Bekijk gratis de handleiding van Draper 28369, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Draper |
| Model | 28369 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 268 MB |
