Draper 09536 handleiding
Handleiding
Je bekijkt pagina 11 van 20
- 10 -
ASSEMBLY
- FITTING THE ROUTER BIT GUARD (Fig.8):
- The router bit guard must be used when not
using the upper and lower blade guides, attach the bit
guard by lining up the fixing holes on the fence and
guard and inserting pin %. Fig.8
- FIXING THE REAR FENCE TO THE WORK TABLE
(Figs.9 - 13):
- Place the fully assembled rear moulded fence onto the
work table Fig.9.
- Remove the front panel by removing four cross slot
screws using a screwdriver (not supplied). Fig.10.
Note: Ensure spindle moulder is isolated from the mains
supply.
- Once the front panel has been removed, insert bolt 8
into the left locating hole from inside the spindle
moulder. Fig.11.
FIG.10
FIG.11
8
FIG.8
%
FIG.9
Bekijk gratis de handleiding van Draper 09536, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Draper |
| Model | 09536 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4996 MB |
