Dragon Touch DT40 handleiding
Handleiding
Je bekijkt pagina 9 van 68
3. Camera Control
• Add (Pair) a Camera
① Press Menu Button and the menu bar will pop up. Press the “+” Right Button or “-”
Left Button until Camera icon is highlighted.
③ Press and hold the PAIR key behind the Camera Unit for at least 3 seconds.
Then the connection is successful.
Note: A Camera Unit can only be registered to one Monitor Unit at any one time.
OK
4.3” LCD
CAM-1
28°C
② Press OK Button to enter to the interface. Camera 1 is the default setting. Press the “+”
Right Button or “-” Left Button to select the desired CAM, and press the OK Button to
start searching for a Camera Unit.
OK
4.3” LCD
1
CAM-1
28°C
3 42
12 13
• View and Scan Camera
These two functions are only useful if you have more than 1 Camera Unit paired. Scan
camera function automatically cycles through your paired camera channels to display each
camera for 20 seconds.
Press OK Button to select the desired Camera Unit to view or select to Scan the cameras.
When under Scan mode the screen will display the video from different paired cameras in
a loop of SCAN1 / SCAN2 / SCAN3 / SCAN4, changing every 20 seconds.
Bekijk gratis de handleiding van Dragon Touch DT40, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dragon Touch |
| Model | DT40 |
| Categorie | Babyfoon |
| Taal | Nederlands |
| Grootte | 9161 MB |
