Dorr SnapShot Cloud 4G Pro RC 100° handleiding

Niet gecategoriseerd

Dorr

224 pagina's

PDF beschikbaar

Handleiding

/ 224

Je bekijkt pagina 39 van 224

doerr.shop

08 | FURTHER FUNCTIONS

08.1 Test Recordings

Option 1: Request a real-time image as described on page 37 in the

„Camera“ section.

Option 2: To trigger a test recording manually on the camera, press

the TEST button (13) once when the status display is active and the

camera is ready for use (see chapter 06.8) to obtain media in the de-

ﬁned setting.

While the data is being written to the SD card, the SD card LED (17d)

ﬂashes green . While the test recording is being loaded into the DÖRR

Cloud, the DÖRR Cloud LED (17f) ﬂashes green .

To view your test recording, go to „Media“ in the DÖRR APP and tap

on the corresponding camera.

08.2 Deleting/Re-registering a camera

In case you want to sell your camera, please follow these steps:

1. Delete the camera in the APP/web interface:

Cameras › tap on the camera to be deleted ›

Camera

› Tap on › Delete camera

2. Reset camera to factory settings

To do this, press the RESET button (15) on the camera, e.g. with a pen,

for approx. 10 seconds until all LEDs brieﬂy light up green twice .

You or the new owner can now register the camera again in the

DÖRR APP.

08.3 In the event of theft

If your camera is stolen, do NOT delete it from the APP, as this is

the only way to ensure that the thief cannot register the camera.

Contact our service via the „Report as stolen“ function and enter

your contact details there.

Cameras › tap on the stolen camera ›

Camera

› Tap on › Report as stolen

09 | MOUNTING / DIRECTING

09.1 Mounting and directing the camera

Pull the supplied mounting strap (26) through the eyelet (23) on the

backside of the camera. Mount the camera to a tree, pole or any other

suitable object. Do not ﬁx the belt ﬁnally at this stage.

We recommend placing the camera at a height of 0.75 m to 1.00 m.

The optimal distance to the subject is between 3 and 10 m. Larger

distances are possible as well, but then the reliability of the motion

sensor is no longer given. The camera lens (05) should now point to

where the object is expected to show-up.

To verify your camera is hung up in a correct angle, we recommend

taking a view test recorings (see chapter 08.1). The camera should be

directed in a way that the object will appear in the centre of the pictu-

re. You may have to re-adjust the camera and take another test shot.

Once the camera position is correct, the mounting belt (26) can be

tightened to hold the camera ﬁrmly.

▶

NOTICE

Please also note chapter 10 with our extensive range of accesso-

ries for installation and anti-theft protection.

09.2 Notes for mounting the camera

09.2.1 PIR sensor

The PIR sensor triggers only under speciﬁc circumstances within a

certain range. The capturing of objects strongly depends on tem-

perature, vegetal cover, reﬂecting surfaces etc. Under perfect con-

ditions the recognition range can be up to 20 m. Usually, you may

expect a range of 15 m. It may take a few attempts to ﬁnd a good

/ 224

Bekijk gratis de handleiding van Dorr SnapShot Cloud 4G Pro RC 100°, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.