Dorr SnapShot Cloud 4G Pro RC 100° handleiding

Niet gecategoriseerd

Dorr

224 pagina's

PDF beschikbaar

Handleiding

/ 224

Je bekijkt pagina 33 van 224

doerr.shop

07 | CAMERA SETTINGS IN THE APP/WEB INTERFACE

Default settings are marked with (*)

Camera Settings

Note: Changes made in settings will be executed by the camera after max. 24 hours.

Camera

Camera Mode

Photo (*) The camera takes photos according to your settings for image size and multi shot.

Video The camera records videos according to your settings for video size and video length.

Photo and Video

The camera ﬁrst takes a picture(s) and then a video according to your settings for picture size,

multi shot, video size and video length.

Sending Mode

Photo (*) Camera is sending photos.

Video Camera is sending videos

Photo and Video Camera is sending photo(s) and 1 video.

Preview

If the ‘Picture’ or ‘Picture and video’ camera mode is selected, the camera sends a reduced-

quality picture.

Security Mode

Disabled (*)

This mode is aimed at users with special security requirements - all data transmission (image

and video) is encrypted. Please note that using this mode results in a considerable increase in

energy consumption. We recommend its use for professional users in the security sector and

in combination with an external power source (see chapter 10.3)

Photo

Video

Photo and Video

Battery Type

Alkaline (*)

To ensure an accurate indication of the battery status, please select whether you have in-

serted alkaline, Ni-MH or lithium batteries in the camera. There are dierent battery types for

lithium - if in doubt, select „Alkaline“.

Ni-MH

Lithium

Remote Control

Realtime (*)

Settings are applied immediately.

🔴

IMPORTANT High battery consumption!

Every 30 minutes

Settings are applied at the latest in the selected time interval. If photos or videos are transmit-

ted from the camera before the time interval expires, the new settings will be applied at this

transmission time.

▶

NOTICE

If you have inadvertently made incorrect settings and the camera is not in real-time

mode, you can correct the settings immediately by ﬁrst making the desired settings in the

app/web interface and then triggering an image manually via the motion detector, e.g. by

waving your hand in front of the PIR sensor (06).

Every hour

Every 2 hours

Every 3 hours

Every 4 hours

Every 6 hours

Every 12 hours

Every 24 hours

Enable GPS (*) GPS is represented in radians on the timestamp (e.g. N48°18‘44“ E010°02‘02“)

SD card overwrite (*)

If the SD card is full, the camera overwrites the oldest recordings

▶

recommended.

If the SD card is full, the camera stops recording until the card is changed or format-

ted.

Kameraname

SnapShot Cloud 4G PRO

The camera name assigned can be changed here.

Time Zone

Europe/Berlin

Select the time zone of your region.

/ 224

Bekijk gratis de handleiding van Dorr SnapShot Cloud 4G Pro RC 100°, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.